ISO High Pressure Plastic PP Industrial Centrifugal Exhaust Blower Ventilation Fan for Production Chemical

Through continuous innovation and change, we are unanimously recognized and trusted by many customers at home and abroad. If you need Anti-corrosion Fan, Rotary Axial Fan, Sawdust Conveyor Fan, please contact us in time, we will do our best to help you! In the future, we will continue to spare no effort to provide our customers with reliable products and services, and contribute to the development of the industry. Our technical expertise, customer-friendly service, and specialized products make us/company name the first choice of customers and vendors. Detailed Info and parameters from the merchandise will probably be sent to you for any thorough acknowledge. Our company has a group of technical personnel and business development personnel with rich practical experience, and can provide users with timely support.

It is suitable for ventilation and drafting of steam boilers below 230t/h in thermal power plants. In the absence of other special requirements, G4-68 can also be used for mine ventilation.
The medium conveyed by the fan is air, and the maximum temperature shall not exceed 80°C; the medium conveyed by the induced draft fan is flue gas, and the maximum temperature shall not exceed 250°C. Before the induced draft fan, a dust removal device with a dust removal efficiency of not less than 85% must be installed to reduce the dust content of the flue gas entering the fan, thereby increasing the service life of the fan.

The fan is mainly composed of an impeller, casing, air inlet, regulating door, and transmission part.
(1) The impeller is welded by 12 backward-inclined airfoil blades, and the arc wheel cover and the flat wheel disc are welded. Due to the use of airfoil blades, the high efficiency, low noise, and high strength of the fan are guaranteed. The impeller is corrected by static and dynamic balance, and the operation is stable.
(2) The casing is a scrolling body welded by ordinary steel plates.
(3) The air inlet is a convergent and streamlined overall structure, which is fixed on the air inlet side of the casing with bolts.
(4) Adjusting door The device used to adjust the flow of the fan consists of petal blades, which are axially installed in front of the air inlet.
(5) The transmission mode of the transmission group is D type. It consists of the main shaft, bearing box, coupling, etc. The main shaft is made of high-quality steel. Adopt a rolling bearing water-cooled one-piece bearing seat.

The company values the concept of making accurate and high-quality ISO High Pressure Plastic PP Industrial Centrifugal Exhaust Blower Ventilation Fan for Production Chemical. On the lookout ahead to make up a good and long-lasting cooperation with you in coming potential! Our products are sold all over the world with reasonable price, thoughtful service and punctual delivery time, enjoying a high reputation in the industry.