High Static Pressure Cabinet AC Fan/ Ventilator

We continue to use advanced technology and technology at home and abroad, so that our Main Ventilation Machine In Mine, Sawdust Conveyor Fan, Dust Removal Air Blower is constantly updated, scaled up in production, and high in quality. Our factory adheres to the corporate tenet of 'customer needs as the center, unlimited service' and the corporate philosophy of 'integrity and win-win, repaying the society'. After years of continuous pioneering and enterprising, we continue to meet customer needs and are well received by customers. Our company's products sell well in overseas markets. In the face of fierce market competition, we will rely on excellent technology, high-quality talents, continuous innovation, satisfactory customer service, and continuous development of new products to meet market needs and continue to create value for customers.

High-Pressure Centrifugal Ventilator:

Daily maintenance and common faults of High-Pressure Centrifugal Ventilator

1. Attention items in fan maintenance work:
①The fan can only operate under completely normal conditions.
②If the fan is started after maintenance, it is necessary to pay attention to whether all parts of the fan are normal.
③ Regularly remove impurities such as dust and dirt inside the fan and check the tightness of the belt at any time to prevent the belt from slipping.
④The maintenance of the fan must be carried out when the machine is stopped.
⑤ During the operation of the fan, if any abnormal phenomenon is found, it should be stopped immediately and checked.
⑥ Except that the grease should be replaced after each dismantling and repair, the grease should be replaced every six months under normal circumstances.

2. The main failure of the high-pressure centrifugal ventilator and its causes:
①The fan vibrates violently
a. The casing or the air inlet rubs against the impeller;
b. Loose or deformed impeller rivets;
c. The inlet and outlet pipes of the fan are poorly installed, causing resonance;
d. There is dust and dirt on the blades; the blades are worn; the impeller is deformed; the shaft is bent to make the rotor unbalanced
e. The positions of the two pulleys are not aligned. The coupling is installed incorrectly, and the centers on both sides of the coupling are not aligned; the position of the coupling changes after working for some time; the elastic components of the coupling are too deformed and worn too much.
②The bearing temperature rise is too high
a. The bearing box vibrates violently;
b. Bearing damage or shaft bending;
c. The grease is of poor quality or contains impurities.
d. The bearing is short of oil or the bearing is too oiled.
③The motor current is too large and the temperature rise is too high
a. The inlet and outlet pipes are not closed tightly when starting up;
b. Input voltage is too low or single-phase power failure;
c. The spindle speed exceeds the rated value;
d. The density of the input medium is too large or the temperature is too low.
e. The motor bearing is damaged; the bearing is short of oil or the oil is too much.
f. The system changes, resulting in a larger load on the fan and a larger load on the motor.

We carry on to acquire and layout excellent quality items for the two our old and new clients and realize a win-win prospect for our shoppers in addition as us for High Static Pressure Cabinet AC Fan/ Ventilator. We will provide high-quality products and excellent services at competitive prices. Product quality and reputation is the cornerstone of our enterprise survival. We pay attention to every requirement put forward by customers, fully consider every detail, actively do a good job in service.