FRP Cone Butterfly Ventilation Fan /Greenhouse/Workshop/Warehouse Axial Equipment FRP Fan with Good Quality/Fiber Glass Fan

Our company's Extraction-type Local Ventilator Under The Mine, Fan Blower, Subway High Pressure Fan performance has reached the domestic advanced level and has the pivotal leading position in the foreign, the domestic same profession. We uphold the development concept of 'adhering to tradition and leading fashion', and constantly innovate and develop ourselves. We have the collection of years of practical experience in production, and use of scientific and technological principles. We sincerely welcome new and old customers and friends from all walks of life to visit, negotiate and cooperate.

Booster Fan Duct Booster Fan:

Booster fan duct booster fans are generally used in forging furnaces and high-pressure forced ventilation. The gas does not contain viscous substances, the dust and hard particles contained do not exceed 150mg/m3, and the gas temperature is 20-800 °C.
Booster fan duct booster fans can fansfan be made into two types: right-handed and left-handed. From the side of the motor, if the impeller rotates clockwise, it is called a right-handed fan, denoted by "right"; the impeller rotating counterclockwise is called a left-handed fan, denoted by "left".
The position of the air outlet of the fan is expressed by the angle of the air outlet of the casing. "Left" and "Right" can be made into six angles of 0°, 45°, 90°, 135°, 180°, and 225°.
Before installation: All parts of the fan should be checked comprehensively, whether the parts are complete, whether the rotation direction of the impeller and the casing are consistent, and whether the connection of each part is tight. Whether the impeller, main shaft, bearing, and other main parts are damaged, whether the transmission group is flexible, etc.

When installing: pay attention to checking the casing, and there should be no tools and debris left in the casing. To prevent rust and reduce the difficulty of disassembly on some joint surfaces, some grease or mechanical oil should be coated. The connection surface between the fan and the foundation, the inlet, and the outlet ducts should be adjusted to match naturally, and the connection should not be forced and is not allowed to add the weight of the duct to each part of the fan. And pay attention to ensure the horizontal position of the fan.

Booster fan duct booster fan installation requirements:
(1) Install according to the position and size are shown in the drawing. To ensure high efficiency, ensure the axial and radial clearance between the air inlet and the impeller.
(2) After installation, try dialing the transmission group to check whether it is too tight or collides with the fixed part.
(3) After all installations are completed and the general inspection is passed, the test operation of the fan can be carried out.
To prevent the motor from being overloaded and burned, when the fan starts, it must be carried out under no load (close the air inlet valve and open the air outlet valve slightly). If the condition is good, gradually open the valve until the specified working condition. During operation, the current should be strictly controlled and the rated value should not be exceeded.

We continue to explore and connect our unique advantages with user needs generated under the social trend to create incomparable FRP Cone Butterfly Ventilation Fan /Greenhouse/Workshop/Warehouse Axial Equipment FRP Fan with Good Quality/Fiber Glass Fan. We have established a complete after-sales service system, and always follow the principle of honest management. Our strength is dedicated to meet the needs of the healthy development of society, create social resource value and corporate brand value, and provide a platform for sustainable development for the society!