Axial Flow Fan Industrial Workshop/Poultry Farm/Greenhouse Exhaust Fan with Ce

We have been making continuous efforts to closely integrate the needs of users, and always follow a technology-leading and user-oriented development model to provide customers with the most effective and economical Centrifugal Blower, forward curved blower, high heat fan. We are willing to serve new and old customers wholeheartedly with strict quality assurance system, professional service and rich industry experience! We insist on people-oriented, benefit-centered, reform-driven, market-oriented, and integrity-based.

Booster Fan Duct Booster Fan:

Booster fan duct booster fans are generally used in forging furnaces and high-pressure forced ventilation. The gas does not contain viscous substances, the dust and hard particles contained do not exceed 150mg/m3, and the gas temperature is 20-800 °C.
Booster fan duct booster fans can fansfan be made into two types: right-handed and left-handed. From the side of the motor, if the impeller rotates clockwise, it is called a right-handed fan, denoted by "right"; the impeller rotating counterclockwise is called a left-handed fan, denoted by "left".
The position of the air outlet of the fan is expressed by the angle of the air outlet of the casing. "Left" and "Right" can be made into six angles of 0°, 45°, 90°, 135°, 180°, and 225°.
Before installation: All parts of the fan should be checked comprehensively, whether the parts are complete, whether the rotation direction of the impeller and the casing are consistent, and whether the connection of each part is tight. Whether the impeller, main shaft, bearing, and other main parts are damaged, whether the transmission group is flexible, etc.

When installing: pay attention to checking the casing, and there should be no tools and debris left in the casing. To prevent rust and reduce the difficulty of disassembly on some joint surfaces, some grease or mechanical oil should be coated. The connection surface between the fan and the foundation, the inlet, and the outlet ducts should be adjusted to match naturally, and the connection should not be forced and is not allowed to add the weight of the duct to each part of the fan. And pay attention to ensure the horizontal position of the fan.

Booster fan duct booster fan installation requirements:
(1) Install according to the position and size are shown in the drawing. To ensure high efficiency, ensure the axial and radial clearance between the air inlet and the impeller.
(2) After installation, try dialing the transmission group to check whether it is too tight or collides with the fixed part.
(3) After all installations are completed and the general inspection is passed, the test operation of the fan can be carried out.
To prevent the motor from being overloaded and burned, when the fan starts, it must be carried out under no load (close the air inlet valve and open the air outlet valve slightly). If the condition is good, gradually open the valve until the specified working condition. During operation, the current should be strictly controlled and the rated value should not be exceeded.

In line with the development concept of 'quality comes from professional, technology guided innovation', our company focuses on the design, R&D and production of Axial Flow Fan Industrial Workshop/Poultry Farm/Greenhouse Exhaust Fan with Ce, providing high-quality products for customers. We have a series of complete technological processes with advanced production and inspection capabilities. All employees of our company have been trained with professional product knowledge and have a strong sense of service before they take up their posts.