350mm 220V 60Hz Industrial Electric Axial Exhaust Portable Air Blower Fan

These principles today extra than ever form the basis of our success as an internationally active mid-size company for Dust Removal Air Blower, High Temperature Boiler Induced Draft Fan, Mining Extraction Type Local Ventilator. We can provide tailor-made products according to the needs of customers. We know how to purchase office equipment and allocate human resources reasonably, for our development strategy is very stable. Our company always provides good quality and reasonable price for our customers.

It is suitable for ventilation and drafting of steam boilers below 230t/h in thermal power plants. In the absence of other special requirements, G4-68 can also be used for mine ventilation.
The medium conveyed by the fan is air, and the maximum temperature shall not exceed 80°C; the medium conveyed by the induced draft fan is flue gas, and the maximum temperature shall not exceed 250°C. Before the induced draft fan, a dust removal device with a dust removal efficiency of not less than 85% must be installed to reduce the dust content of the flue gas entering the fan, thereby increasing the service life of the fan.

The fan is mainly composed of an impeller, casing, air inlet, regulating door, and transmission part.
(1) The impeller is welded by 12 backward-inclined airfoil blades, and the arc wheel cover and the flat wheel disc are welded. Due to the use of airfoil blades, the high efficiency, low noise, and high strength of the fan are guaranteed. The impeller is corrected by static and dynamic balance, and the operation is stable.
(2) The casing is a scrolling body welded by ordinary steel plates.
(3) The air inlet is a convergent and streamlined overall structure, which is fixed on the air inlet side of the casing with bolts.
(4) Adjusting door The device used to adjust the flow of the fan consists of petal blades, which are axially installed in front of the air inlet.
(5) The transmission mode of the transmission group is D type. It consists of the main shaft, bearing box, coupling, etc. The main shaft is made of high-quality steel. Adopt a rolling bearing water-cooled one-piece bearing seat.

With the business philosophy of 'advancing with the times, developing with integrity, and serving attentively', we continue to broaden the scope of service, improve service quality, so as to provide our customers with high-quality and low-cost 350mm 220V 60Hz Industrial Electric Axial Exhaust Portable Air Blower Fan. Never-ending improvement and striving for 0% deficiency are our two main quality policies. Our experienced staff will always be ready to make efficient, professional and quick response to your different needs.