300mm Air Conditioning Box Cabinet Radial Centrifugal Fan

As our Axial Flow Ventilator, Centrifugal Induced Draft Fan, High Pressure Centrifugal Blower adopts leading-edge technologies and successful marketing approaches, we are now ahead of the competition in the industry. We are in close contact with famous logistics and shipping companies to ensure on-time and complete delivery according to customers' needs, so that customers can really buy with confidence and use with comfort. The pursuit of high quality has helped customers improve their brand image, brought huge brand value to the company, as well as laid a solid foundation for our future path towards original branding. Our employees have the indomitable will and indomitable spirit of struggle, and can constantly overcome difficulties and forge ahead in the work. Our company adheres to trust and respect, respect employees' personality, affirm their own value, and achieve the perfection of design with strong design strength and strong sense of responsibility.

High-Pressure Centrifugal Ventilator:

Daily maintenance and common faults of High-Pressure Centrifugal Ventilator

1. Attention items in fan maintenance work:
①The fan can only operate under completely normal conditions.
②If the fan is started after maintenance, it is necessary to pay attention to whether all parts of the fan are normal.
③ Regularly remove impurities such as dust and dirt inside the fan and check the tightness of the belt at any time to prevent the belt from slipping.
④The maintenance of the fan must be carried out when the machine is stopped.
⑤ During the operation of the fan, if any abnormal phenomenon is found, it should be stopped immediately and checked.
⑥ Except that the grease should be replaced after each dismantling and repair, the grease should be replaced every six months under normal circumstances.

2. The main failure of the high-pressure centrifugal ventilator and its causes:
①The fan vibrates violently
a. The casing or the air inlet rubs against the impeller;
b. Loose or deformed impeller rivets;
c. The inlet and outlet pipes of the fan are poorly installed, causing resonance;
d. There is dust and dirt on the blades; the blades are worn; the impeller is deformed; the shaft is bent to make the rotor unbalanced
e. The positions of the two pulleys are not aligned. The coupling is installed incorrectly, and the centers on both sides of the coupling are not aligned; the position of the coupling changes after working for some time; the elastic components of the coupling are too deformed and worn too much.
②The bearing temperature rise is too high
a. The bearing box vibrates violently;
b. Bearing damage or shaft bending;
c. The grease is of poor quality or contains impurities.
d. The bearing is short of oil or the bearing is too oiled.
③The motor current is too large and the temperature rise is too high
a. The inlet and outlet pipes are not closed tightly when starting up;
b. Input voltage is too low or single-phase power failure;
c. The spindle speed exceeds the rated value;
d. The density of the input medium is too large or the temperature is too low.
e. The motor bearing is damaged; the bearing is short of oil or the oil is too much.
f. The system changes, resulting in a larger load on the fan and a larger load on the motor.

We are capable of developing different 300mm Air Conditioning Box Cabinet Radial Centrifugal Fan to supply the best quality products and service to the customers. Our high quality products and reasonable price have been widely approved by our customers both in home and abroad. We insist on innovation to make our products meet the changing needs of the market and solve various difficulties encountered by our customers from the root. We value every communication and service with our customers.