How The Gearbox Of High Pressure Fan Works

The oil level in the reducer of high-pressure fan is connected outside the oil pipe at the bottom of the reducer, and it will directly appear in the liquid level gauge outside the air duct. For the oil pipe material of high-pressure fan, it actually uses galvanized carbon steel pipe, and at the bottom of an oil pipe 600mm away from the reducer, we also found a corrosion hole about 5mm in diameter. For the lubricating oil leaked from the high-pressure fan, when it falls on the water collecting layer of the cooling tower under the fan, because the aperture is relatively small, the amount of oil leaked is not much in a certain period of time, and there is a large amount of water vapor in the air duct for flushing, so there is no oil accumulation on the surface of the water collector under the discharge. Moreover, for glycol circulating water system, it actually uses bromine borate solution as a daily biocide directly, because the addition of biocide and the role of fan extraction will make the water vapor of high-pressure fan of cooling tower often contain bromine ions.