Y4-73 Type 12D 132 Kw Fans For Large-Scale Cooling Boiler Ventilating

Product Description

G4-73 and Y4-73 Boiler Ventilating, and Induced Draft fans

G4-73 and Y4-73 boiler ventilating and induced draft fans: are suitable for ventilating and induced draft fans of steam boilers below 670t/h in thermal power plants. The medium conveyed by the ventilator is air, and the maximum temperature shall not exceed 80°C; the medium conveyed by the induced draft fan is flue gas, and the maximum temperature shall not exceed 250°C. Before the induced draft fan, a dust removal device must be installed to minimize the dust content of the flue gas entering the fan.
Structural features

The fan is mainly composed of an impeller, casing, air inlet, regulating door, and transmission part.
(1) The impeller is welded by the obliquely cut blades of the backward-inclined wings. Due to the use of wing-shaped blades, the high efficiency, low noise, and high strength of the fan is guaranteed. The impeller is corrected by static and dynamic balance, so it runs smoothly.
(2) The casing is a spiral body welded with ordinary steel plates.
(3) The convergence and streamlined air inlet are made into an integral structure and fixed with the fan inlet side bolts.
(4) The adjusting door is a device used to adjust the flow of the fan and is installed axially in front of the fan.
The main shaft of the transmission part is made of high-quality steel, and the fan adopts rolling bearings. The bearing housing consists of an integral cylindrical bearing housing and a pillow bearing housing.


Products Specifications:

 

Product Parameters

Performance and selection

Detailed Photos

Certifications

Packaging & Shipping

1) The equipment is equipped with a number of signs such as a product nameplate, rotation direction sign, wind direction sign, grounding sign, lifting sign, safety warnings, and so on.
2) Product nameplate mainly includes the contents of the equipment: main technical parameters (flow, pressure, motor power, Revolutions Per Minute), product number, manufacturing date, and so on, which is convenient for users to check at any time
3) Small equipment adopts the type of export wood packaging and large equipment, and the steel frame transports large cargo transportation.
4) All equipment is waterproof and rainproof.



 

Company Profile

Zibo Hengding Fan Co., Ltd. Is located in Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China. The company covers an area of 12,000 square meters and a construction area of 8,000 square meters. The company has total assets of 27 million RMB and 186 employees, 46 engineers, and technicians. It has passed ISO9001 quality management system certification and has maintained long-term technical cooperation relationships with many colleges and universities, such as Xi'an Jiaotong University, Tianjin Nankai University, and so on. Now, it has developed into a modern ventilation equipment manufacturing enterprise with first-class testing and producing equipment, high-quality and excellent production molds, strong scientific research and development strength, a strict quality management system, and gradually perfected development. The company has 15 years of production experience, with an annual output of 5,000 sets of ventilators
  

 

Our Advantages

Strict quality standards, precision machining, and other spare parts and design maintain product stability, strictly select product parts suppliers, and perfect after-sales service system to allow customers to enjoy a new experience

Our company has introduced the latest research results of the Chinese Academy of Sciences, C4-II ternary flow wing twisted blades, which have high aerodynamic efficiency.
The surface of the ventilator impeller blade is sprayed with advanced super-resistant (CN) metal material to form a wear-resistant, anti-corrosion protection layer on the surface of the blade. The wear resistance of the blade surface is 10 to 50 times higher than that of the ordinary carbon steel material, thereby greatly prolonging the service life of the blade.

 

Quality assurance measures:

In long-term production management, our company has formed a set of standardized process control measures and control points, which can provide users with high-quality products in all directions. Our company has a good reputation and is an enterprise that users can absolutely trust.

Our company has obtained the IS09001 certification from the International Organization for Standardization (see Enterprise Qualification Materials for details). We strictly standardize the operation process and control points of product manufacturing

After Sales Service

When the equipment of the buyer is installed, our company is responsible for on-site installation guidance, personnel training and commissioning of test-drive, The separately purchased fan accessories can be used for telephone connection guidance and debugging

Our company guarantees that the structural safety, aerodynamic performance, running noise, and appearance, quality of the supplied ventilators can be checked and accepted by relevant departments.

The quality assurance period for the supplied ventilator equipment, except for special provisions, is 18 months from the final acceptance of the ventilator.

FAQ

Q. What information should I provide when inquiring?

A: Fan name/model, KW, Air pressure, Flow rate Air Volume, and temperature

Q. What is your warranty?
A. Our warranty is 18 months after receiving the fans. During the warranty period, replace the damaged parts free of charge. Out warranty period, to provide timely, high-quality technical services and price concessions spare parts to ensure.
continuous safe and high-quality equipment operation.

Q. How does your factory control product quality?
A. We have a quality inspection department. All fans are running more than 3 hours before delivery to test the quality. If there is a quality problem, we will produce a new one.

Q. What are your terms of payment?
A. TT 40% AS THE ADVANCE PAYMENT AND TT 60% AFTER INSPECTION BEFORE SHIPPING.
B. 100% IRREVOCABLE L/C AT STGHT.

Q. What products do you produce?
A. Centrifugal fan, tunnel fan, axial fan, jet fan, mining fan, exhaust fan,anti-corrosion blower, high-pressure blower, explosion proof fan, fan accessories, etc, welcome to contact us to learn more details.

Q. Where is your factory? Can I visit your factory?
A. Zibo Hengding Fan Co., Ltd. Is located in Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China.

Q. How long will it take to ship after the order?
A. 10-15 Days if you need it urgently, we can discuss it for shorting time.

Q. Is the product customizable?
A. Various types can be customizable.



Contact Us

Company: Zibo Hengding Fan Co., Ltd.
Address: Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China.
Website: https://www.hengdingfan.com
 
Tel: +86 13806434669
Fax: +86-533-6069989
Cellphone: +86 13806434669
Email:fan@hengdingfan.com

Hot Tags: y4-73 type 12d 132 kw fans for large-scale cooling boiler ventilating, China, manufacturers, suppliers, factory, price, for sale, CE certification, backward curved fan, centrifugal cabinet fan, spal centrifugal blower, small centrifugal fan, High Pressure Ventilator, backward centrifugal fan